55mm Adjustable Sliding Door Guide – Suits Screen Doors

A direct replacement adjustable bottom sliding door guide for screen doors.

Key Features

• Adjustable bottom guide
• Overall 10.3 x 55mm
• Australian stock, dispatched within 1 business day

Fits & Replaces

• Direct replacement for most Australian aluminium sliding screen door bottom guides of this pattern.
• Fit is decided by the overall guide size of 10.3 x 55mm — measure your old guide over its full length and width before ordering; the adjustment takes up small differences in track height, not in footprint
• Print the Actual Size Identifier below and lay your old part straight onto it — that confirms the fit in seconds

Specifications

• TradeBase SKU: GDEADJ55
• Overall size: 10.3 x 55mm

Installation Tips

• Clean the bottom track out before you fit. Grit packed in the channel makes the door jam and wears the guide flat.
• Set the guide so it just holds the door into the track without dragging — wound out too far it will bind and wear out quickly.
• Slide the door through its full travel and re-check the adjustment at both ends before refitting the stops.

Care & Maintenance

• Sweep the track out every few months, more often in coastal or dusty areas. Keep the guide dry — grease only holds grit against it.

Warranty

Covered by our 12-month warranty and your rights under the Australian Consumer Law.

Check the fit before you buy

Download the TradeBase Actual Size Identifier (PDF) and print it on A4 at 100% / Actual size — not Fit to page. The part is reproduced at true 1:1 scale on a 10 mm grid and measures 9.8 mm overall. Lay your existing part straight onto the page to confirm it matches. A calibration bar on the sheet lets you check the printer has not scaled the page.