57.3mm Sliding Door Guide – Suits Cyclone™ Screen Doors

A direct replacement top sliding door guide for screen doors. Includes roller — acetal offset radial roller with bearing. Suits Boral® KM™ Cyclone, old G.James® and others. Our Sliding Screen Door Top Guide, Plastic 2 Pack (SKU GDETOP25) can also be used as the top guide. For the bottom guide, use our 61mm Sliding Door Guide (SKU GDE61) or our 52.2mm Sliding Door Guide (SKU GDE52).

Key Features

• Acetal construction
• Top guide, roller included
• Acetal offset radial roller with bearing
• Overall 30.8 x 57.3mm
• Australian stock, dispatched within 1 business day

Fits & Replaces

• Direct replacement for Boral® KM™ Cyclone and older G.James® sliding screen door top guides.
• Fit is decided by the overall guide size of 30.8 x 57.3mm and by the offset axle position on the roller — measure your old guide and check the axle offset before ordering

Specifications

• TradeBase SKU: GDE57
• Material: Acetal
• Overall size: 30.8 x 57.3mm
• Roller: acetal offset radial, with bearing

Installation Tips

• Check the top track before you fit. File any burrs or flat spots smooth — a damaged track will chew out a new roller within weeks.
• Clean all grit and old grease out of the track. Grit is what kills a roller, not load.
• Replace top guides in pairs. A new roller running against a worn one carries uneven load and both wear out early.
• Note which way the offset axle faces before you take the old guide out — turned the wrong way it changes the door height.
• Slide the door through its full travel before refitting the stops.

Care & Maintenance

• Use a dry lubricant only — silicone or dry PTFE. Oil and grease hold dust and grind the roller.
• Sweep the track out every few months, more often in coastal or dusty areas.

Warranty

Covered by our 12-month warranty and your rights under the Australian Consumer Law.